Digital Panel Meters - Counters - Timers - DIN Rail Transmitters - Large Digit Displays
Price List  |  Distributors  |  Search  |  Inquiry  |  Home

TS6 Serial-to-Analog DIN Rail Transmitter
 Converts serial data to a scaled analog signal.
 

Features RS-232 or RS-485 serial input. Choice of 3 protocols: Modbus RTU, Modbus ASCII, or Laurel ASCII. Able to retrieve data from long character strings. Data rates from 300 to 19,200 bps. Isolated 4-20 mA or 0-10V transmitter output, user selectable. Analog output resolution: 0.025% of span (12 bits). Analog output accuracy: ±0.05% of span. Update rate to 60/sec. DIN rail mount package only 22.5 mm (0.89") thick. Powered by AC or DC. Detachable screw-clamp connectors. Powered by 95-240 Vac ±10% (standard) or low voltage AC or DC (optional). Easy setup using PC-based Instrument Setup Software. Optional dual solid state relays for alarm or control.

Description The Laureate TS6 serial input to analog output transmitter accepts RS-232 or RS-485 serial data with Modbus or Laurel ASCII Protocols, and converts it to an isolated, scalable 4-20 mA or 0-10V analog output signal. The unit fits on a 35 mm DIN rail and is only 22.5 mm (0.89") thick. It is normally powered by AC (95-240 Vac ±10%), but can optionally be powered by low voltage AC or DC. All electrical connections are via detachable screw-clamp plugs. Serial Data Input One three-screw-terminal connector accepts RS-232 or RS-485 serial data, as selected via jumpers on the main board. Data rates are selectable as 300, 600, 1200, 2400, 4800, 9600 or 19200 bps. The RS-232 interface is suitable for short cable runs and point-to-point communications. The RS-485 interface is compliant with the EIA/TIA-485 standard and supports multiple addressable devices on the same data line using the Modbus protocol or Laurel ASCII Protocol. Modbus implementation is fully compliant with Modbus over Serial Line Specification V1.0 (2002) in RTU or ASCII, half duplex (2-wire) operation, with up to 247 digital addresses. Selectable Data Retrieval The Laureate serial-to-analog transmitter is able to retrieve digital data from long character strings. You can specify character positions, start and stop ASCII characters, how many characters to skip, and how many characters to process. Analog Transmitter Output The analog output is selectable as 0-10V or 4-20 mA (also scalable for 0-20 mA). All selections provide 12-bit (0.025%) resolution of the output span and are ultra-linear to within one bit. Accuracy is ±0.05% of output span. Output isolation from signal, power and serial communication grounds is provided by a separate on-board transmitter power supply, thereby eliminating potential problems caused by ground loops. The supply can an drive 20 mA into a 500 ohm (or lower) load for 10V compliance, or 10V into 5K ohm (or higher) load for 2 mA compliance. Easy to Set Up and Install Transmitter programming is via a three-terminal RS-232 port using Laurel's PC-based Instrument Setup Software. This software can be downloaded from this website at no charge. The required transmitter-to-PC interface cable is available from Laurel (P/N CBL03). Laurel's transmitters and meters can be part of PC-based data logging systems using Laurel's Datalogging Software, which operates under the Laurel ASCII Protocol.

Specifications
Laureate TS6 Serial-to-Analog DIN Rail Transmitter

RS-232 Input Interface
Data Rates Devices on RS232 line Connector Supported Protocols Isolation	300, 600, 1200, 2400, 4800, 9600, 19200 bps 1 (point-to-point, short distances) Three detachable screw-clamp plugs: RXD, TCD, common Modbus or Laurel ASCII 250V rms from power and analog output continuous, 2.3 kV rms per 1 min test.
RS-485 Input Interface
Cabling Data Rates Devices o RS485 line Connector Standards Compliance Supported Protocols Isolation	Half duplex (2-wire) 300, 600, 1200, 2400, 4800, 9600, 19200 bps 32 max Three detachable screw-clamp plugs: D0, D1, common EIA/TIA-485 Modbus or Laurel ASCII 250V rms from power and analog output continuous, 2.3 kV rms per 1 min test.
Modbus Protocol
Type Standards Compliance Digital Addresses	RTU or ASCII. Modbus over Serial Line Specification V1.0 (2002) 247 max
Laurel ASCII Protocol
Type Digital Addresses	ASCII. 31 max
Serial Input Electrical Protection
ESD Protection EMI Immunity EFT Protection Short Circuit Protection	15 kV per IEC 1000-4-2 10 V/m per IEC 1000-4-3 2 kV per IEC 1000-4-4 Continuous
Analog Output
Output Levels Compliance, 4-20 mA Compliance, 0-10V Output Resolution Output Accuracy Isolation	0-20 mA or  0-10 Vdc (selectable) 10V ( 0-500 ohm load ) 2 mA ( 5 kOhm load ) 12 bits (4,096 steps) ±0.05% of output span 250V rms from power and serial I/O continuous, 2.3 kV rms per 1 min test.
Dual Relay Output (optional)
Relay Type Load rating	Two solid state relays, SPST, normally open, Form A 120 mA at 130 Vac or 170 Vdc, 28 ohms in series
Power, Electrical & Setup
Power to Transmitter   Transmitter Setup	95-240 Vac ±10% or 90-300 Vdc (DC operation not UL approved) 9-30 Vac or 10-48 Vdc (low voltage power option) Via RS-232 from PC using Instrument Setup Software and CBL03 cable.
Mechanical
Case Dimensions Case Mounting Electrical Connections	120 x 101 x 22.5 mm 35 mm rail per DIN EN 50022 Detachable screw-clamp plugs
Environmental
Operating Temperature Storage Temperature Relative Humidity	0°C to 70°C -40°C to 85°C 95% at 40°C, non-condensing

Pinout
Laureate Serial Input, Analog Output, DIN Rail Transmitter
Shown with optional dual relay outputs.

Ordering Guide
Laureate Serial Input, Analog Output, DIN Rail Transmitter
 Click on the radio buttons to build a model number with pricing.

Quantity		1 2 3 4 5 6 7 8 9 10
Transmitter Type	TS6   Serial input transmitter, 4-20 mA, 0-20 mA or 0-10V output.	$175
Power	0  95-240 Vac ±10% 1  Isolated 12-30 Vac or 10-48 Vdc.	NC $30
Setpoint Output	0  None. 2  Isolated Dual Solid State Relays.	NC $30
Accessories	CBL03  RS-232 cable, TS6 to computer. CBL02  USB to RS-232 cable adapter.	$19 $39

Configured model number	TS600
Configured price per model	$175
Quantity	1
Extended price	$175