Model IPC Splashproof Cover
Protects 1/8 DIN instruments to NEMA-4 / IP67 from front

• Meets NEMA 12 (IP52) when hinged door is snapped in place.

• Meets NEMA 4X (IP67) when door is clamped by a locking key.

• Fits all 1/8 DIN Laureates and most other 1/8 DIN instruments.

• Utilizes existing 1/8 DIN cutout -- no extra panel holes required.

• Made of high-impact polycarbonate -- no metal parts to corrode.

• Hinged door for easy access to instrument.

• Low cost.

Model IPC Splashproof Cover is a rugged, impact resistant, clear lens that fits over a 1/8 DIN instrument to make it dust and water proof from the front of the panel. Sealing meets NEMA 12 (IP52) standards for water slash and dust protection when the hinged door is simply snapped in place. Sealing meets NEMA 4 (IP67) standards for hose-directed water when the hinged door is further clamped down with a provided plastic locking key.

Model IPC fits all Laurel 1/8 DIN instruments as well as 1/8 DIN instruments by other manufacturers, provided that instrument dimensions in front of the panel do not exceed 48 x 96 x 15 mm (1.89" x 3.78" x 0.59"). Model IPC can be purchased as an add-on option for new instruments, or be fitted to existing installations.

The IPC assembly utilizes a clear base and clear door with a cam hinge. The hinge is captive when the base and meter are installed, and allows the door to be opened for easy access to the meter for programming or setpoint adjustment. The base can be sealed against the instrument panel by an O-ring or a self-adhesive neoprene gasket, both provided.

A capillary seal is formed between the door and the base by a tapered recess in the door and a tapered ridge in the base. Capillary action causes a small amount of water to be drawn in between the two surfaces, thereby producing a water-tight film around the sealing area. For applications where fluid residues are unacceptable, such as food processing, apply a light coating of clear silicone grease, or other approved sealant, to the mating grove to prevent any ingress of liquid and enable the cover to withstand steam cleaning.

The door is latched against the base by a locking tab when the door is snapped shut. Positive clamping of the door and protection against opening of the locking tab by hose-directed water are provided by a locking key, which remains in place to provide a much higher clamping force than the tab alone.

Model IPC is easy to install. It utilizes the existing 1/8 DIN panel cutout (45 x 92 mm). No new panel holes are required.

Mechanical

Instrument panel cutout
External dimensions, base
External dimensions, door
Protrusion in front of panel
Sealing, door to cover base
Sealing, base to instrument panel
Provision for assembly integrity

1/8 DIN, 45 x 92 mm (1.77" x 3.62")
115.3 x 55.4 x 6.1 mm (4.54" x 2.18" x 0.25")
103.4 x 54.4 x 18.0 mm (4.07" x 2.14" x 0.71")
23.8 mm (0.94")
Capillary seal
O-ring gasket or adhesive backed gasket (both provided)
Door is captive when IPC assembly is panel mounted.

Materials

Base, door & locking key
Provision for corrosion resistance
Gaskets

Transparent polycarbonate
No metal parts
O-ring gasked or self-adhesive neoprene gasket.

Sealing Performance

Hinged door snapped in place
Hinged door locked by locking key

NEMA 12 (IP52) protection against dust and splashed water.
NEMA 4 (IP67) protection against hose-directed water.