| Serial Data
Input |
Serial Data
Types
Serial
Connector
Displayed Information |
RS232 or RS485 (specify at time of order)
Detachable plug-in screw terminals
ASCII:
Displays any character within 7-segment display
limitations.
Quant: Displays only numeric ASCII
values.
Qa.Tot: Quantity totalizer. Can be used to accumulate
weight values, for example after each batch. Uses a contact closure
to trigger addition. |
Baud
Rate
Data Format
Termination Character
Reject
Characters
Addressing |
300 to 115200
baud
701, 7e1, 7n2, 801, 8e1, 8n1, 8n2
Hex 00 to FF
Counted
from termination character
00 (wildcard) to F7 |
| Process
Signal Input |
A/D
Converter
Current Signal Types
Voltage Signal
Types
Accuracy
Tempco, Scale
Tempco,
Offset
Excitation |
20-bit resolution
0-10 mA, 0-20 mA, 4-20 mA with 33Ω
input resistance.
0-5V, 1-5V, 0-10V with 1 MΩ input
resistance.
± 0.05% of range.
± 25 ppm/°C
± 30
ppm/°C
24 Vdc up to 40 mA, or
ratiometric 0-10V for slide-wire |
| Strain Gauge
/ Load Cell Input |
A/D
Converter
Signal Gain
Accuracy
Tempco, Scale
Tempco,
Offset
Excitation Output |
20-bit resolution
Suitable for 0.5 mV / V to 4 mV / V load
cells
± 0.05% of range.
± 25 ppm/°C
± 30 ppm/°C
Isolated
10V up to 120 mA to power up to four 350Ω load cells in
parallel |
| Pulse Input
for Frequency, Rate, Total |
Number of
Inputs
Signal Types
Debounce
Timing
Reference |
4
Configurable for contact
closures, NPN or PNP proximity switches,
5V logic pulses, 24V
pulses, quadrature
Programmable to eliminate false counting from
contact bounce.
Temperature-controlled quartz
crystal. |
| Pulse Input
for Clock Operation |
Time
Reference
Clock Format |
Precision,
temperature-compensated quartz crystal.
HH:MM or
HH:MM:SS |
| Display |
Number of Digits
Digit Height
Digit
Color
Brightness
Numeric Format
Clock Format |
4 or 6
57 mm (2-1/4"), 102 mm (4.0"), 150 mm
(5.9"), or 200 mm (7.9")
Red
Variable
8.8.8.8. or 8.8.8.8.8.8.
(standard)
HH:MM or HH:MM:SS
(optional, specify at
time of order) |
| User
Controls |
Scaling
Filtering
Rounding
Linearization |
Digital direct or theoretical scaling with scale &
offset.
Digital filtering, time constants adjustable from 0 to
25 sec.
Selectable last-digit rounding of 1, 2, 5, 10, 20, 50
units.
Up to 10 points, direct or theoretical
calibration. |
| Logic
Inputs |
Font Panel
Controls
Logic Functions
Logic Levels |
Calibration, Tare, Reset, Max/Min, Alarms
Three logic inputs, individually configurable for Hold,
Reset, Tare, Peak / Valley, Net/Gross, Memory Address.
Normally
open, NPN or contact closure input to activate.
5V open circuit,
1 mA switched current. |
| Power |
AC Power
(standard)
DC Power (option)
Max Consumption |
100-240
Vac
11-30 Vdc
30 VA |
| Analog Output
Option |
Output
Levels
Resolution
Accuracy
Stability
Output
Isolation
Scaling
Special Features |
0-20/4-20 mA into 0 to 500Ω, 0.4 μA resolution.
0-10V into loads > 600Ω, 0.2 mV resolution.
-10 to+10V into loads > 600Ω, 0.4
mV resolution.
16 bits
0.1% of range
50 ppm/°C
Isolated
from input and power
Digitally scalable
Can be set to operate
from net or gross value. |
| Alarm Output
Option |
Relay
Type
Special Features |
2
Alarms rated 5A, 250VAC, SPDT
Adjustable hysteresis
In-flight
compensation facility.
Energize or de-energize on
trip.
Adjustable timers to set energize and de-energize delays.
Can also be set to pulse for applications needing less than 100%
duty cycle.
In-band and out-of-band alarm function.
Manual and
automatic in-flight compensation.
Can be set to operate from net
or gross value. |
| Serial Data
Output Option |
Output
Types
Special Features |
RS232 or RS485, addressable, on demand or continuous
output.
Can include time and date with RTC option fitted.
Can
be set to operate from net or gross value. |
| Environmental |
Storage Temp.
Operating
Temp.
Sealing
Mounting |
-20°C to +70°C
0C to
50°C, non-condensing
IP65 standard, all-round
Wall mount,
suspension mount, panel mount |
| Approvals |
| Types |
Produced to IPC
610 Class 2 Standard
UL ISO9001:2008
QA |
