 |
Digital Panel Meters for Flow Rate,
|
||||||||||||||||||||||||||||||||||||||||||||
|
Laureate Pulse
Input Rate Meter, Model FR 6-digit scalable counter with dual pulse / AC inputs from turbine flow meters. Allows square root extraction, custom curve linearization, and display of rate or total. Dual channels allow addition or subtraction of two flow rates for net flow, or the ratio of two flow rates to control mixing operations. Includes isolated transducer excitation supply. Fast read rates with peak hold. Optional analog output, relays, and data I/O. Six 0.56" (14.2 mm) high digits, 1/8 DIN case. |
|
|
Laureate Process
Meter, Model P 5-digit DC digital panel meter for analog signals such as 0-10 mA, 4-20 mA or 0-10 V. Programmable zero and span using three methods: scale and offset, two-points, or system-level calibration using actual transducer signals for known readings. Fast read rates with peak hold. An Extended processor version allows custom curve linearization and rate from successive analog readings. Fast read rates with peak hold. Includes isolated transducer excitation supply. Optional analog output, relays, and data I/O. Five 0.56" (14.2 mm) high digits, 1/8 DIN case. |
|
|
Laureate Process
Totalizer, Model VF This digital panel meter totalizes 0-1 mA, 4-20 mA or 0-10 V analog signals, for example to display totalized volume from the 4-20 mA analog signal of a flow meter transducer. Capabilities include zero and span adjustment, square root extraction from differential flow meter signals, custom curve linearization, and elapsed time based on rate (for example, the time it will take to fill a tank at the current flow rate. Optional data I/O and relays for alarm or control. Six 0.56" (14.2 mm) high digits, 1/8 DIN case. |
|
|
Laureate Pulse Input Batch Controller, Model FR The Extended Laureate with FR dual-channel signal conditioner accepts pulses from turbine flow meters and other transducers with a pulse output. Jumper selections provide optimum operation for different flow sensor types and noise conditions. Batch control is provided by three relays. Six 0.56" (14.2 mm) high digits, 1/8 DIN case. |
 |
|
Laureate Analog
Input Batch Controller, Model VF The Extended Laureate with VF voltage-to-frequency signal conditioner accepts the 0-1 mA, 4-20 mA or 0-10 V process signal from a flow meter transducer. Jumper selections provide optimum operation for different flow sensor types and noise conditions. Batch control is provided by three relays. Six 0.56" (14.2 mm) high digits, 1/8 DIN case. |
 |
|
88-PRO Loop-Powered
Digital Panel Meter Scalable process meter powered by 1-5 mA, 4-20 mA or 10-50 mA current loop, with no need for external power. 3 1/2 LCD digits, 12.7 mm (0.50") digit height, 1/8 DIN case. |
 |
|
Junior Series
Process Meter, Model P Low-cost, screwdriver-adjusted, 3-1/2 digit panel meter indicator available for process signals (e.g., 4-20 mA, 0-10 V). Includes non-isolated transducer excitation supply. No control outputs. 3-1/2 digits, 0.56" (14.2 mm) digit height, 1/8 DIN case. |
|
|
Grand Series "Large Digit"
Displays, Models P & FR 5-digit large-digit displays with a digit height of 2.2" (57 mm), 4.0" (102 mm), 5.7" (144 mm) or 7.9" (200 mm) for long viewing distances. Available for process signals (Model P) or rate / frequency (Model FR). Scalable to engineering units. Includes non-isolated transducer excitation supply. Optional relays and data I/O. Choice of display brightness and cases for indoor or outdoor mounting. |
 |
|
Microminiature Digital
Process Meter, Model M-35 Fits 22.5 x 45 mm cutout. Accepts 4-20 mA, 0-10 mA, 0-2V, 1-5 V, or 0-10 V signals. 3-1/2 0.39" (10 mm) high digits. Powered from 10-30 Vdc. |
|
|
BAR Series 1/8 DIN
Bargraph Process Display 30-segment bar graph meter with 75 mm (3") scale length for 0-1 mA, 4-20 mA, 0-10V or 1-5 V process signals. Optional dual-relay output.
PRO-BAR Large
Bargraph Process Display |
 |
|
|||||||||
|
Resource Pages |
